Wheels

Thanks to Zipp’s Total System Efficiency (TSE) carbon laminate and design, the Super-9 is engineered for a new era of wider tires and lower tire pressure in TT and triathlon. Combining Zipp’s wheel laminate with a wider rim profile and optimized tire interface helps you overcome the four barriers to speed: wind resistance, gravity, rolling resistance, and vibration losses. The Super-9 is fastest with 28mm tubeless tires inflated to lower than traditional pressure. To ensure proper inflation, the Super-9 comes with the TyreWiz 2.0 tire-pressure monitor integrated out of sight and perfectly balanced so you’ll always know if you’re in your desired PSI/bar range. Inflation is a breeze with redesigned pump access. Moreover, the disc features a redesigned pump-access port—no stickers needed. The Super-9 features the premium ZR1 hub with ceramic bearings and 66 points of engagement. - Aero, durable, light weight - Tubeless compatibility for optimization of wider tires with lower tire pressure, lower rolling resistance, and increase grip and compliance - Greater stopping power and modulation of disc brakes - 23mm internal rim width - 28mm minimum and optimal tire size recommended - Integrated TyreWiz 2.0 tire pressure monitor and redesigned pump access cover - Low drag ceramic bearings for race day performance - Includes pumpchuck adapter and Zipp wheel bag

- Zipp's most advanced and fastest deep-rim wheel for road, triathlon, and time trialing - More than 300 grams lighter that previous model - Optimized tire bed for easy tire installation - Sawtooth rim with Hyperfoil nodes and HexFin ABLC dimple pattern for top aero and crosswind-stability performance with an undulating rim depth - Cognition V2 hubset rolls efficiently whether you are pedaling or coasting. Its Axial Clutch V2 technology reduces drag and lowers friction - Center locking rotor interface. Lockring is included with the wheels - Zipp graphics applied using Zipp's ImPress direct-print technology - Minimum 25mm tire width - Lifetime Warranty

Bringing cutting edge performance to the diverse needs of drop bar off-roaders, Reserve’s 40/44 GR gravel wheels are tailored for the demands of off-road exploration and gravel riding, but with an aero focus. Leveraging Turbulent Aero technology, the 40/44 GR features a 40mm front paired with a 44mm rear, establishing it as the fastest and most stable Reserve gravel wheelset to date. Wider than the previous gravel wheels to allow for tires up to 50c tires, the 40/44 GR plays nicely with today’s slew of big volume gravel tires and a semi-hooked rim makes tubeless set up easier than ever. - Designed to be your no fuss aero gravel riding and racing wheelset - Wider internal width of 27mm - Tubeless and tube compatible - Wide/low front mixed with narrow/tall rear for maximum stability, lowest weight and optimal aerodynamics - Internally reinforced spoke holes to strengthen the area where the rim sees the most force, around the spoke nipple. This provides for improved strength without adding unnecessary weight - Built with DT Swiss Hubs

Zipp's 353 NSW Tubeless Disc-brake wheel is the pinnacle of our pursuit of versatility and speed. This wheel fuses Zipp's two most advanced approaches, Sawtooth rim profile and TSE, for an all-encompassing approach to performance. With its undulating 45mm-deep rim shape, the 353 NSW provides speed on every terrain with best-in-class aerodynamic efficiency and crosswind stability. The 353 NSW is Zipp's lightest tubeless wheel yet, making it a fast-puncher ready to fight its way into the breakaway. Zipp's use of hookless (straight side) rims in the 353 NSW is integral to achieving our mission of Making You Faster. With hookless, the transition between the tire and the rim is more seamless and aero. Zipp's hookless rims have more efficient resin distribution, which means lighter wheels. They also are highly durable. Zipp's 353 NSW's Sawtooth rim shape with Hyperfoils optimizes aerodynamic efficiency and crosswind stability. The Sawtooth design also allows the rim to be structurally strong but light. That will help you snap out of corners and maintain that speed no matter the terrain, especially in the steep, punchy stuff. The 353 NSW utilizes Zipp's Total System Efficiency, or TSE, approach to wheel design: overcoming specific barriers to speed: wind resistance, gravity, rolling resistance, and vibration losses. The wheel's 25mm internal width is ideal for running wider tubeless tires at reduced air pressure for a more efficient ride. At the center of the 353 NSW is the Cognition V2 Hubset, re-engineered with an updated Axial Clutch V2 mechanism for quicker engagement and lower friction, as well as improved durability. - Versatile endurance wheel for the modern road bike with tubeless and hookless rim profile - Our lightest tubeless wheel yet, making it a fast-puncher ready to fight - Optimized tire bed for easy tire installation - TSE for greater efficiency and reduced rolling resistance - Sawtooth rim with Hyperfoil nodes and HexFin ABLC dimple pattern for top aero and crosswind-stable performance with an undulating rim depth - Cognition V2 hubset rolls efficiently whether you are pedaling or coasting. Its Axial ClutchV2 technology reduces drag and lowers friction - Ships with 12mm end caps - Center Lock rotor interface. Lockring is included - Zipp graphics applied using Zipp's ImPress direct-print technology - Lifetime warranty

- Zipp’s ultimate road racing wheelset. Aerodynamically efficient and stable in all wind conditions. - Optimized for 28mm tubeless tires at lower pressure for reduced rolling resistance and vibration damping. - Total System Efficiency (TSE) approach addresses wind resistance, gravity, rolling resistance, and vibration losses. - More than 400 grams lighter than its predecessor - Hookless rims for a more seamless and aerodynamic transition between tire and the rim - Cognition V2 Hubset with an updated Axial Clutch V2 mechanism for quicker engagement, lower friction, and improved durability. - Center locking rotor interface. Lockring is included with the wheels - 1360g - Lifetime warranty

Today's XC race machines are marvels of modern engineering, evolved to decrease weight while improving ride quality and durability, with the idea to carry the world’s best athletes to the top step of the podium.The Reserve 28 XC is the race-ready culmination of everything learned from years at the highest levels of competition, and it delivers on a heap of promises. At a genre blurring 1300g for a complete wheelset (with no rider weight limit and our market-defining lifetime warranty), the 28 XC features a wider and lower rim profile to increase strength and lateral rigidity, while adding vertical compliance for enhanced traction. - Designed for XC riding and racing - Carbon fiber construction with 2.8mm asymmetric offset - Step-in internal rim bed to ease tubeless installation - Lower profile for added lateral stiffness with increased vertical compliance - Ships with rim tape installed, tubeless-ready valves, and cards identifying the Santa Cruz builder of each of your wheels - Backed by Santa Cruz lifetime warranty

Reserve 30 wheels feature a 30mm internal width that supports 2.3-2.5" tires, and the thick rim beads stand up to the abuse of tough, rocky, steep tracks ridden at elite speed. While DH rims see greater single impacts, nothing beats the full weekend of regular abuse that an EWS race dishes out. To say nothing of the infamous 'Anti-Grip' and the rocks buried within the moondust in the Andes of Chile. - Designed for DH riding and racing - Carbon fiber construction with 4mm asymmetric offset - Reinforced rim bed for impact resistance - Rated for e-bike use - Ships with rim tape installed, tubeless-ready valves, and cards identifying the builder of each of your wheels - Backed by a lifetime warranty - Built with Industry Nine Hubs

Reserve 30 wheels feature a 30mm internal width that supports 2.3-2.5" tires, and the thick rim beads stand up to the abuse of tough, rocky, steep tracks ridden at elite speed. While DH rims see greater single impacts, nothing beats the full weekend of regular abuse that an EWS race dishes out. To say nothing of the infamous 'Anti-Grip' and the rocks buried within the moondust in the Andes of Chile. - Designed for DH riding and racing - Carbon fiber construction with 4mm asymmetric offset - Reinforced rim bed for impact resistance - Rated for e-bike use - Ships with rim tape installed, tubeless-ready valves, and cards identifying the builder of each of your wheels - Backed by a lifetime warranty

Reserve 30 wheels feature a 30mm internal width that supports 2.3-2.5" tires, and the thick rim beads stand up to the abuse of tough, rocky, steep tracks ridden at elite speed. While DH rims see greater single impacts, nothing beats the full weekend of regular abuse that an EWS race dishes out. To say nothing of the infamous 'Anti-Grip' and the rocks buried within the moondust in the Andes of Chile. - Designed for DH riding and racing - Carbon fiber construction with 4mm asymmetric offset - Reinforced rim bed for impact resistance - Rated for e-bike use - Ships with rim tape installed, tubeless-ready valves, and cards identifying the builder of each of your wheels - Backed by a lifetime warranty - Built with Industry Nine Hubs

Let’s face it, modern downhill tracks are not for the faint of heart. From the moment you drop in, it’s a hari cari mix of boulders, roots, bumps and jumps awaiting you, and literally the only thing keeping you upright and connecting you to the ground is your wheels. It’s serious business, and the abuse of a day riding DH is no joke, but the Reserve 31 DH wheels have your back. - Designed for DH riding and racing - Carbon fiber construction with 5mm asymmetric offset - Reinforced rim bed for impact resistance - Rated for e-bike use - Ships with rim tape installed, tubeless-ready valves, and cards identifying the builder of each of your wheels - Backed by a lifetime warranty

Zipp's 353 NSW Tubeless Disc-brake wheel is the pinnacle of our pursuit of versatility and speed. This wheel fuses Zipp's two most advanced approaches, Sawtooth rim profile and TSE, for an all-encompassing approach to performance. With its undulating 45mm-deep rim shape, the 353 NSW provides speed on every terrain with best-in-class aerodynamic efficiency and crosswind stability. The 353 NSW is Zipp's lightest tubeless wheelset yet, making it a fast-puncher ready to fight its way into the breakaway. Zipp's use of a hookless (straight side) rim in the 353 NSW is integral to achieving our mission of Making You Faster. With hookless, the transition between the tire and the rim is more seamless and aero. Zipp's hookless rims have more efficient resin distribution, which means lighter wheels. They also are highly durable. Zipp's 353 NSW's Sawtooth rim shape with Hyperfoils optimizes aerodynamic efficiency and crosswind stability. The Sawtooth design also allows the rim to be structurally strong but light. That will help you snap out of corners and maintain that speed no matter the terrain, especially in the steep, punchy stuff. The 353 NSW utilizes Zipp's Total System Efficiency, or TSE, approach to wheel design: overcoming specific barriers to speed: wind resistance, gravity, rolling resistance, and vibration losses. The wheel's 25mm internal width is ideal for running wider tubeless tires at reduced air pressure for a more efficient ride. At the center of the 353 NSW is the Cognition V2 Hubset, re-engineered with an updated Axial Clutch V2 mechanism for quicker engagement and lower friction, as well as improved durability. - Versatile endurance wheel for the modern road bike with tubeless and hookless rim profile - Our lightest tubeless wheel yet, making it a fast-puncher ready to fight - Optimized tire bed for easy tire installation - TSE for greater efficiency and reduced rolling resistance - Sawtooth rim with Hyperfoil nodes and HexFin ABLC dimple pattern for top aero and crosswind-stable performance with an undulating rim depth - Cognition V2 hubset rolls efficiently whether you are pedaling or coasting. Its Axial ClutchV2 technology reduces drag and lowers friction - Ships with 12mm end caps - Center Lock rotor interface. Lockring is included - Zipp graphics applied using Zipp's ImPress direct-print technology - Lifetime warranty

Hyperon Ultra wheels are designed for the most refined and demanding cyclists. A wheel that embodies the true product perfection that stems from unparalleled Campagnolo experience. The result is a new wheelset for racing bikes with the magic ratio of features: lightweight construction, unmatched reactivity and superior handling. - 37mm deep, UD high-strength carbon rim construction with C-LUX finish, 2-Way Fit system with 21mm internal width to accommodate clincher and tubeless tires - Monolithic disc brake hubs with CULT ceramic bearings and aluminum axle to support low rolling resistance - 21 circular-section slim steel spokes in a two-cross pattern - Aero Mo-Mag technology maximizes aerodynamics and enables the construction of a lighter rim - Includes 50mm Tubeless valve, Campagnolo wheel bag and tire levers

Reserve wheels are built on the highest quality carbon rims on the market. Everything from the thickness of the rim beads to the external spoke hole reinforcements comes purely from experience of knowing what riders need at every level-from international racing to your local trails. - Built with standard high-quality components including j-bend spokes (28 count) and Sapim mechanically locking nipples - Ships with rim tape installed, tubeless-ready valves, and cards identifying the Santa Cruz builder of each of your wheels - Backed by a lifetime warranty - Built with Industry Nine Hubs

The Bora Ultra WTO 35 has the shallowest wind tunnel optimized (WTO) rim profile of the new Ultra wheel family, redesigned to maximize aerodynamics and reduce weight. These wheels are an Italian masterpiece, refined through rigorous testing and proud craftmanship to be a leader in their space. Every external component of the wheel has been redesigned to maximize aerodynamic efficiency and reduce weight, saving you precious energy and generating greater speed from the same rider input. Campagnolo’s CULT ceramic bearings spin effortlessly within the front disc hub’s aerodynamic carbon body, and the 2-Way Fit rims are ready for immediate tubeless use without rim tape. - 35mm deep, UD high-strength carbon rim construction with C-LUX finish, 2-Way Fit system and 23mm internal width can accommodate wider tires, including tubeless - Bora ULTRA disc brake hubs and CULT ceramic bearings, 21 Aero Elliptical, straight-pull double-butted spokes - Possess pure control with G3 lacing, designed to ensure maximum stiffness and cornering precision – and stunning, premium aesthetics - Recommended tire size: 700c, 28 - 35mm - Includes Aero Mo-Mag nipple maintenance kit, Tubeless valve, AFS lockring, Campagnolo wheel bag, Campagnolo accessories bag and tire levers

At only 33mm deep, the Campagnolo Bora Ultra WTO 33 has the shallowest wind tunnel optimized (WTO) rim profile of the Ultra family. Every external component of the wheel has been redesigned to maximize aerodynamic efficiency and reduce weight, saving precious energy, and generating greater speed from the same rider input. - The Bora Ultra WTO 33’s lower weight helps riders to reach heights even faster, change pace instantly, and descend with great speed and confidence - Rims are crafted from Campagnolo’s Hand Made Ultra-Light Carbon (H.U.L.C.) - Rims feature Campagnolo’s mirror-like Luxury (C-LUX) finish - Undrilled 2-Way Fit rim beds allow for perfect tubeless compatibility without rim tape - Carbon fiber front hub body is hourglass shaped to improve aerodynamics, and is securely bonded to a light aluminium hub flange - Integrated radial spoke seats ensure perfect alignment

Campagnolo’s Bora Ultra WTO 45 has the perfect balance of speed, agility and stability, making it the best choice for all-round riders. The rim’s versatile design takes account of real-world riding conditions, not just those created in a wind tunnel, and the result is the most efficient drag-reducing rim shape available. - Lightweight, thanks to its Hand Made Ultra-Light Carbon (H.U.L.C.) construction - Slimmer Aero Elliptical spokes and hidden nipples help slice through the air - Hub body is securely bonded to a light aluminium hub flange - Integrated radial spoke seats ensure perfect alignment - A uniquely stunning C-LUX finish and new, subtle Bora Ultra graphics ensure the wheels have the show to match their go - Ceramic bearings spin effortlessly within the front aerodynamic carbon body of the disc hub - The 2-Way Fit rims are ready for immediate tubeless use without rim tape, designed for tire widths from 23mm - Aerodynamically optimised for 25mm tires - Weight: 660 g

E30 HD wheelsets offer the perfect balance of stiffness, performance, durability, and weight. Achieve more traction and stability to increase confidence while squaring off turns and diving for the inside lines; these wheels deliver quick acceleration and pop to get the entire bike lofted into the air and carry momentum over the toughest obstacles. - Designed for Trail, all-mountain and enduro E-riding - Reinforced rim bed for impact resistance - Asymmetrical rims build stiffer, stronger and more reliable wheels by improving the bracing angles and equalizing the spoke tensions between the drive and non-drive side spokes. - Rated for e-bike use - Built with Industry Nine Hubs

Reserve 30 wheels feature a 30mm internal width that supports 2.3-2.5" tires, and the thick rim beads stand up to the abuse of tough, rocky, steep tracks ridden at elite speed. While DH rims see greater single impacts, nothing beats the full weekend of regular abuse that an EWS race dishes out. To say nothing of the infamous 'Anti-Grip' and the rocks buried within the moondust in the Andes of Chile. - Designed for DH riding and racing - Carbon fiber construction with 4mm asymmetric offset - Reinforced rim bed for impact resistance - Rated for e-bike use - Ships with rim tape installed, tubeless-ready valves, and cards identifying the builder of each of your wheels - Backed by a lifetime warranty - Built with Industry Nine Hubs

Reserve 30 wheels feature a 30mm internal width that supports 2.3-2.5" tires, and the thick rim beads stand up to the abuse of tough, rocky, steep tracks ridden at elite speed. While DH rims see greater single impacts, nothing beats the full weekend of regular abuse that an EWS race dishes out. To say nothing of the infamous 'Anti-Grip' and the rocks buried within the moondust in the Andes of Chile. - Designed for DH riding and racing - Carbon fiber construction with 4mm asymmetric offset - Reinforced rim bed for impact resistance - Rated for e-bike use - Ships with rim tape installed, tubeless-ready valves, and cards identifying the builder of each of your wheels - Backed by a lifetime warranty - Built with Industry Nine Hubs

Reserve returns with the ultimate climbing wheelset; the 34/37 Turbulent Aero. Developed using Turbulent Aero data and technology, the 34/37 TA is designed to help get you up those mountain passes as fast as possible. Comparted to the original 34/37, the revised TA set is 30 grams lighter per rim, and 4 grams faster in the wind tunnel. And in keeping with Reserve workmanlike ways, you’ll find external nipples, standard spokes, no tire limitations with a semi-hooked design and no rider weight limits. - Designed to be your no fuss climbing wheelset. There are no weight limits, no tire limitations, and can be set up tubeless or with tubes - Mixed profile front and rear rims provide maximum stability, lowest weight and optimized aerodynamics - Internally reinforced spoke holes to strengthen the area where the rim sees the most force, around the spoke nipple. This provides for improved strength without adding unnecessary weight - Lifetime warranty supported by a no-fault crash replacement - Built with DT Swiss Hubs

Developed and tested using Turbulent Aero technology, the 42/49 is designed for everything you do, providing all-day capability with aerodynamic sensibilities. Raced at events as varied as the Paris-Roubaix and the Giro D’Italia, the 42/49 wheels have a lifetime warranty supported by a no-fault crash replacement. And in keeping with Reserve workmanlike ways, you’ll find external nipples, standard spokes, no tire limitations with a semi-hooked design and no rider weight limits. - Wind tunnel tested using Computational Fluid Dynamics (CFD), with the goal of maximizing aerodynamics while enhancing stability - Optimized carbon fiber rim construction allows Reserve to define the exact fiber orientation for each rim model, to maximize stiffness and strength without sacrificing weight - Built with DT Swiss Hubs

E30 HD wheelsets offer the perfect balance of stiffness, performance, durability, and weight. Achieve more traction and stability to increase confidence while squaring off turns and diving for the inside lines; these wheels deliver quick acceleration and pop to get the entire bike lofted into the air and carry momentum over the toughest obstacles. - Designed for Trail, all-mountain, and enduro E-riding - Reinforced rim bed for impact resistance - Asymmetrical rims build stiffer, stronger and more reliable wheels by improving the bracing angles and equalizing the spoke tensions between the drive and non-drive side spokes. - Rated for e-bike use - Built with Industry Nine Hubs

The Bora Ultra WTO 35 has the shallowest wind tunnel optimized (WTO) rim profile of the new Ultra wheel family, redesigned to maximize aerodynamics and reduce weight. These wheels are an Italian masterpiece, refined through rigorous testing and proud craftmanship to be a leader in their space. Every external component of the wheel has been redesigned to maximize aerodynamic efficiency and reduce weight, saving you precious energy and generating greater speed from the same rider input. Campagnolo’s CULT ceramic bearings spin effortlessly, and the 2-Way Fit rims are ready for immediate tubeless use without rim tape. - 35mm deep, UD high-strength carbon rim construction with C-LUX finish, 2-Way Fit system and 23mm internal width can accommodate wider tires, including tubeless - Bora ULTRA disc brake hubs and CULT ceramic bearings, 21 Aero Elliptical, straight-pull double-butted spokes - Possess pure control with G3 lacing, designed to ensure maximum stiffness and cornering precision – and stunning, premium aesthetics - Recommended tire size: 700c, 28 - 35mm - Includes Aero Mo-Mag nipple maintenance kit, Tubeless valve, AFS lockring, Campagnolo wheel bag, Campagnolo accessories bag and tire levers

At only 33mm deep, the Campagnolo Bora Ultra WTO 33 has the shallowest wind tunnel optimized (WTO) rim profile of the Ultra family. Every external component of the wheel has been redesigned to maximize aerodynamic efficiency and reduce weight, saving precious energy, and generating greater speed from the same rider input. - The Bora Ultra WTO 33’s lower weight helps riders to reach heights even faster, change pace instantly, and descend with great speed and confidence - Rims are crafted from Campagnolo’s Hand Made Ultra-Light Carbon (H.U.L.C.) - Rims feature Campagnolo’s mirror-like Luxury (C-LUX) finish - Undrilled 2-Way Fit rim beds allow for perfect tubeless compatibility without rim tape - Oversized 36 tooth ratchet freehub is fast to engage and very durable, plus it accepts N3W, XDR, HG freehub bodies - Integrated radial spoke seats ensure perfect alignment

Reserve wheels are built on the highest quality carbon rims on the market. Everything from the thickness of the rim beads to the external spoke hole reinforcements comes purely from experience of knowing what riders need at every level-from international racing to your local trails. - Built with standard high-quality components including j-bend spokes (28 count) and Sapim mechanically locking nipples - Ships with rim tape installed, tubeless-ready valves, and cards identifying the Santa Cruz builder of each of your wheels - Backed by a lifetime warranty - Built with DT Swiss Hubs

Today's XC race machines are marvels of modern engineering, evolved to decrease weight while improving ride quality and durability, with the idea to carry the world’s best athletes to the top step of the podium.The Reserve 28 XC is the race-ready culmination of everything learned from years at the highest levels of competition, and it delivers on a heap of promises. At a genre blurring 1300g for a complete wheelset (with no rider weight limit and our market-defining lifetime warranty), the 28 XC features a wider and lower rim profile to increase strength and lateral rigidity, while adding vertical compliance for enhanced traction. - Designed for XC riding and racing - Carbon fiber construction with 2.8mm asymmetric offset - Step-in internal rim bed to ease tubeless installation - Lower profile for added lateral stiffness with increased vertical compliance - Ships with rim tape installed, tubeless-ready valves, and cards identifying the Santa Cruz builder of each of your wheels - Backed by Santa Cruz lifetime warranty

The SES 2.3 is purpose-built for the mountains. Ultra-light, respectfully aerodynamic, and optimized for tubeless tires, the SES 2.3 raises the bar for performance through hilly and mountainous terrain. There’s no better option for the uncompromising climber who values performance up and down the mountain than the new SES 2.3. At sub-1200 grams, they’re in a league of their own and deliver a real-world advantage in hilly terrain through their lightweight design and confidence-inspiring handling. - Full carbon rim features continuously running fibers throughout the rim, tapering laminates, and removing excess material, the SES 2.3 achieves an impressive feat in weight reduction and composites engineering. Additionally, layering fibers in specific orientations achieves zone-specific performance requirements like impact toughness, stiffness, and tire retention - Wide hookless bead deign greatly reduces the likelihood of pinch-flatting by providing a blunt surface upon which to bottom out the tire, dissipating energy across a larger surface area and preventing tire damage - Innerdrive mechanism features oversized 42mm steel ratchets positioned inboard and over the bearings, reducing stress on the axle and bearings while ensuring positive and reliable engagement - Interchangeable ratchets (sold separately) allow riders to easily tune their rides for their personal performance needs. Whether it be maximizing efficiency, response, or reliability - Premium Straight Pull hubs utilize equal spoke lengths with an anti-twist spoke design for improved wheel strength and performance, a lightweight alloy hubshell, stainless steel sealed bearings and easy to service axle system - Molded Spoke Hole Technology offers a variety of benefits that ultimately result in a more durable and reliable carbon fiber rim and wheel

As the most versatile wheel in the line, the SES 3.4 is the go-to for just about any terrain or surface conditions. The high-volume design of the rim and Wide Hookless Bead technology not only makes the SES 3.4 a modern road wheel that is raced at the World Tour level, but it’s also a favorite for mixed surface events due to its feature benefits that clearly separate it from other wheels in the same depth category. Pinch-flat resistance, low weight, and an aero profile optimized around high-volume tires are key features of the SES 3.4, making it the most adept all-around wheel. - Full carbon rim is optimized to further improve tubeless tire and rim reliability with a hookless bead design that allows for the precise rim dimensions required to achieve the best tubeless performance - Wide hookless bead deign greatly reduces the likelihood of pinch-flatting by providing a blunt surface upon which to bottom out the tire, dissipating energy across a larger surface area and preventing tire damage - Innerdrive mechanism features oversized 42mm steel ratchets positioned inboard and over the bearings, reducing stress on the axle and bearings while ensuring positive and reliable engagement - Interchangeable ratchets (sold separately) allow riders to easily tune their rides for their personal performance needs. Whether it be maximizing efficiency, response, or reliability - Premium Straight Pull hubs utilize equal spoke lengths with an anti-twist spoke design for improved wheel strength and performance, a lightweight alloy hubshell, stainless steel sealed bearings and easy to service axle system - Molded Spoke Hole Technology offers a variety of benefits that ultimately result in a more durable and reliable carbon fiber rim and wheel - 42mm rear depth and 25mm internal rim width supports minimum tire sizes of 27mm, with an Aero Optimized design around 29mm tires. For use with Tubeless tires only - Rims are pre-taped and tubeless ready

When speed across most any terrain is priority number one, look no further than the SES 4.5. Originally designed for the cobbles and crosswinds of Paris-Roubaix to provide an aero benefit with high volume tires, the SES 4.5 was the first of its kind and is now re-designed to deliver more speed in a lighter package. The SES 4.5 has been re-engineered to reduce weight, increase aero efficiency and further expand its capabilities when the going gets fast. Whether you’re pinning on the number for race day or seeking the fastest road wheelset across undulating terrain, the SES 4.5 is in the sweet spot for speed. - Full carbon rim is optimized to further improve tubeless tire and rim reliability with a hookless bead design that allows for the precise rim dimensions required to achieve the best tubeless performance - Wide hookless bead deign greatly reduces the likelihood of pinch-flatting by providing a blunt surface upon which to bottom out the tire, dissipating energy across a larger surface area and preventing tire damage - Innerdrive mechanism features oversized 42mm steel ratchets positioned inboard and over the bearings, reducing stress on the axle and bearings while ensuring positive and reliable engagement - Interchangeable ratchets (sold separately) allow riders to easily tune their rides for their personal performance needs. Whether it be maximizing efficiency, response, or reliability - Premium Straight Pull hubs utilize equal spoke lengths with an anti-twist spoke design for improved wheel strength and performance, a lightweight alloy hubshell, stainless steel sealed bearings and easy to service axle system - Molded Spoke Hole Technology offers a variety of benefits that ultimately result in a more durable and reliable carbon fiber rim and wheel - 56mm rear depth and 25mm internal rim width supports minimum tire sizes of 27mm, with an Aero Optimized design around 27 - 28mm tires. For use with Tubeless tires only - Rims are pre-taped and tubeless ready

Striking the ultimate balance between weight savings, stability, aerodynamics, and rolling efficiency, the SES 6.7 defines Real-World Fast and raises the bar for modern aero wheel performance. Grams of rim, versus grams of drag, make the SES 6.7 the outright fastest wheel on the road. - Full carbon rim is optimized to further improve tubeless tire and rim reliability with a hookless bead design that allows for the precise rim dimensions required to achieve the best tubeless performance - Wide hookless bead deign greatly reduces the likelihood of pinch-flatting by providing a blunt surface upon which to bottom out the tire, dissipating energy across a larger surface area and preventing tire damage - Innerdrive mechanism features oversized 42mm steel ratchets positioned inboard and over the bearings, reducing stress on the axle and bearings while ensuring positive and reliable engagement - Interchangeable ratchets (sold separately) allow riders to easily tune their rides for their personal performance needs. Whether it be maximizing efficiency, response, or reliability - Premium Straight Pull hubs utilize equal spoke lengths with an anti-twist spoke design for improved wheel strength and performance, a lightweight alloy hubshell, stainless steel sealed bearings and easy to service axle system - Molded Spoke Hole Technology offers a variety of benefits that ultimately result in a more durable and reliable carbon fiber rim and wheel - 67mm rear depth and 23mm internal rim width supports minimum tire sizes of 25mm, with an Aero Optimized design around 27 - 28mm tires. For use with Tubeless tires only - Rims are pre-taped and tubeless ready - Due to the refined and lightweight construction of the SES 6.7 and its sidewalls, this wheel is not suitable for off-road/gravel applications