Weighing in at a mere 260 grams per set, the SPRY, with its sleek, super low-profile design, makes a great addition to the XPEDO flat pedal line up. The magnesium-cast body measures only 11mm thin and allows plenty of ground clearance in the most aggressive terrains. Its large platform area with 14 pins on each pedal provides superior grip for maximum pedal efficiency. - Weight: 260g - Body: Magnesium - Spindle: CroMo - Bearings: 2 Cartridge - Bushings: 1 DU - Pins: 28 Straight Pins per pair - Size: 106x100x11 (mm)
Crank Brothers' Mallet 3 pedals sport the company's super easy-to-enter/exit 4-sided cages with wide aluminum/polycarbonate platforms for stellar support and stability, as well as tough chromoly axles with steel wings for durability, making these great pedals ideal for downhill riding and free riding. The open design quickly sheds mud for reliability in sloppy conditions and the traction pins grip well when you're riding clipped out between corners.
Crank Brothers' most versatile pedal. The Candy excels at it all — cyclocross, XC, trail, and all mountain. 4-sided entry enables superior mud-shedding capability, and customizable float and release angles create a dialed-in feel. Specs: Spindle material: Forged scm 435 chromoly steel Body material: 6061-T6 aluminum Wing material: Stamped steel Spring material: 300 series stainless steel Release angle: 15° / 20° Q-factor: 52mm Inner bearing type: Igus LL-glide bearing Outer bearing type: Enduro cartridge bearing Cleat: Premium brass cleats with shims included Weight: 355g per pair Warranty: 5 years
Crank Brothers' Candy 3 pedals combine 4-sided cages for super-easy entry/exit with CNC'd aluminum platforms for low weight, great foot stability, and on-trail durability. The Candy 3s feature chromoly axles, stainless steel springs, CNC machined aluminum wings, and an open design that sheds mud fast, making them ideal for sloppy conditions and cyclocross. They're also enhanced with inner needle bearings and water-tight internals for consistently smooth pedaling.
From the company that pioneered clipless pedal technology comes the Tour de France-winning Keo 2 Max pedals. They feature lightweight composite bodies and wide platforms for excellent support, comfort and pedaling efficiency. Complementing the great feel is Look's low-profile design that places you closer to the axles for even more pedal power and a lower center of gravity for better cornering. There's also built-in float allowing your feet to self-adjust to the optimum position while you pedal, which protects your knees. Plus for smooth running and durability there are chromoly axles, three sets of sealed bearings plus stainless-steel contact plates. You also get adjustable release tension. - Usage: Recreational to Competition - Body: Composite - Axle: Chromoly + - Pedal Stack Height + Cleats: 17.3mm - Contact Surface Area: 500 mm² - Float: 8 or 12 adjustable spring - Cleats: Kéo Grip Cleats - Pedal Weight: 130 grams (328 grams per pair with cleats and screws) - Pedals Thread 9/16-inch
Crankbrothers' most versatile pedal. The Candy excels at it all – cyclocross, XC, trail, all mountain. 4-sided entry enables superior mud shedding capability, and customizable float and release angles create a dialed-in feel. Spindle material: Forged scm 435 chromoly steel Body material: One piece composite Wing material: Stamped steel Spring material: 300 series stainless steel Release angle: 15° / 20° Q-factor: 52mm Inner bearing type: Igus LL-glide bearing Outer bearing type: Enduro cartridge bearing Cleat: Premium brass cleats with shims included Weight: 294g per pair Warranty: 5 years
Crank Brothers' most versatile pedal. The Candy excels at it all – cyclocross, XC, trail, all mountain. 4-sided entry enables superior mud-shedding capability, and customizable float and release angles create a dialed-in feel. - Spindle material: Forged scm 435 chromoly steel - Body material: One piece composite - Wing material: Stamped steel - Spring material: 300 series stainless steel - Release angle: 15° / 20° - Q-factor: 52mm - Inner bearing type: Igus LL-glide bearing - Outer bearing type: Enduro cartridge bearing - Cleat: Premium brass cleats with shims included - Weight: 294g per pair - Warranty: 5 years
You've got flat shoes and shoes with cleats. Are you really gonna let your pedals tell you which ones you can wear? Crank Brothers' hybrid-style Double Shot is a flat and clipless pedal to suit your every pedaling whim. Molded pins and ribs offer superior grip, and diamond plate pads are supremely tactile. You've got entry from either side of the pedal, so that's two chances per revolution to catch. Thanks to the wide, platform-style body, though, you'll keep moving even if you don't. Specifications: - spindle material: forged scm 435 chromoly steel - body material: A380 aluminum - wing material: 17-4PH stainless - spring material: 300 series stainless steel - release angle: 15° / 20° - q-factor: 52mm - inner bearing type: igus LL-glide bearing - outer bearing type: enduro cartridge bearing - cleat: premium brass cleats with shims included - weight: 395g per pair
The Crank Brothers Mallet E 11 is the premium version of the ideal enduro racing pedal. The specs say it all. - Titanium wings to reduce weight - Dual chamfered edges to reduce rock-strikes - Exclusive double-anodized black and gold colorway - Concave platform for secure foothold - 6 adjustable pins per side for grip - Traction pad technology to optimize the shoe/pedal interface - Ribbed body for better traction when unclipped - 52mm q-factor for maneuverability on tight trails - Hex alloy endcap for durability - 4-sided entry / superior mud shedding - Customizable float & release angle - Premium bearings & double seal system
VP's Grind Pedals meet the needs of hard-core riders who want a slick and durable set of pedals, and they also work great for anyone who likes stable and comfortable platforms. The Grinds have versatile good looks and feature a thin profile, durable 1-piece nylon bodies with grip pins, boron-steel axles and oversize inboard bearings.
$199.00 - $205.00
Designed for the serious enthusiast or first time clipless user, the Speedplay Ultra Light Action Pedal System features an advanced hybrid pedal technology that combines the most user-friendly characteristics found in Speedplay's popular X and Zero road pedals. Speedplay Ultra Light Action pedals blend the legendary ease-of-entry and luxurious non-centering free-float of Speedplay's X Pedal System together with the robust spring design and enhanced durability of Speedplay's Zero Pedal System. Named "Ultra Light Action" after its unique low-force, high-security latch mechanism, the new Speedplay Ultra Light Action Pedal System provides the easiest and most intuitive entry and release functions ever. - Ultra Light Action Stainless: At 103 grams per pedal, it’s one-third lighter than most other clipless systems. * Note: Ultra Light Action pedals are not compatible with Speedplay Zero and X-Series cleats. Ultra Light Action cleats are not compatible with Zero and X-Series pedals.
When you need extra tread so your feet stay planted, Electra's Chopper Pedals are up to the task. With a durable pedal body and sturdy, smooth-spinning spindles, the Chopper Pedals give you the confidence you need in traffic or even on the trails.
$59.99 - $79.99
Get ready to ride Take your riding to the next level with Bontrager Comp MTB pedals. A fully adjustable release tension lets you dial in the right feel for your ride and adds the confidence and efficiency of a secure connection to your bike. Durable materials and sealed cartridge bearings ensure lasting performance for this SPD-compatible pedal. Cleats and hardware included. - MTB pedals with dual sided SPD-compatible engagement - Durable Chromoly spindle for long-lasting durability - Sealed cartridge bearings provide smooth, reliable feel - Adjustable release tension - Includes cleats and mounting hardware
Ready for city shoes or cycling shoes Be ready for anything with the Bontrager Commuter pedal. This dual-sided pedal features a confident platform on one side and a cycling shoe clip-in on the other. Durable materials and sealed cartridge bearings ensure lasting performance for this SPD-compatible pedal. Cleats and hardware included. - Versatile SPD-compatible and platform combo design - Durable Chromoly spindle for long-lasting durability - Sealed cartridge bearings provide smooth, reliable feel - Adjustable release tension - Includes cleats and mounting hardware
Crank Brothers Mallet DH, the choice of DH world champions. - Concave platform for secure foothold - 8 adjustable pins per side for grip - Traction pad technology customizable interface - Ribbed body for better traction when unclipped - Chamfered edges to reduce rock-strikes - 57mm q-factor for stability at speed - 4-sided entry / superior mud shedding - Customizable float and release angle - Premium bearings and double seal system - Spindle material: Forged scm 435 chromoly steel - Body material: 6061-T6 aluminum - Wing material cast: Stainless steel - Spring material 300 series stainless steel - Release angle 15° / 20° - Max rider weight no restriction - Q-factor 57mm - Inner bearing type IGUS LL-glide bearing - Outer bearing type enduro cartridge bearing - Cleat premium brass cleats with shims included - Adjustable pins 8 per side for grip - Endcap hex alloy - Weight: 479 grams
Size-specific elite-level platform pedal provides optimal shoe/pedal interface. - Optimal surface area - Minimal profile 16mm thin - 10 adjustable pins per side for grip - Premium bearings & seal system - Stamp small recommended for shoe sizes: 5-10 (us); 37-43 (EU) - Stamp large recommended for shoe sizes: 10-15 (us); 43-49 (EU) Specs: - Spindle material: Forged SCM 435 chromoly steel - Body material: 6061-T6 aluminum - Inner bearing type: Igus LL-glide bearing - Outer bearing type: Enduro cartridge bearing - Footprint: 114mm x 111mm - Adjustable pins: 10 per side - Weight: 455g per pair - Warranty: 5 years
Your pedals like to be pampered. The Crank Brothers Pedal Refresh Kit gives you everything you need to keep them happy. Pedal Refresh Kit includes: - enduro catridge bearings - igus LL-glide bearings - double seal system (internal and external seals) - hex alloy end caps - o-rings - nuts - sleeve bushings - bearing removal tool Compatible with the following pedals (2010-present): - Eggbeaters - Candys - Mallets - 5050s
Single-sensing Pedal-based Power Meter Ride stronger, smarter, connected with the Vector 3S pedal-based power meter. As you strive to beat your personal best on your next race or Gran Fondo, power is the most reliable way to gauge your performance on any given day, at any given time. Unlike other power meters, Vector 3S has a sensor housed in the left pedal, so it delivers reliable, accurate data on every training session. - Installs like any other pedal and quickly transfers between bikes - Reports cadence and total power (watts) - Easily upgrades to dual-sensing system - Fully integrates with Garmin cycling ecosystem for data analysis - Allows for easy updates via compatible Edge cycling computers, ANT+ connectivity or Bluetooth-enabled fitness devices and Garmin Connect Mobile app - Battery life: up to 120 hours - Cleat hardware included WARNING: The maximum weight limit of the cyclist using the Vector system is 231 lbs (105 kg). Cyclists over this weight limit risk personal injury and property damage. Specifications: - Battery type: LR44/SR44 (x2) - Battery life: up to 120 hours - Weight: 324 g - Max. rider weight: 105 kg - Accuracy: +/- 1.0% - Cleat type: Keo - Q-factor: 53 mm/ 55mm with supplied spacing washer - Stack height: 12.2 mm - Field calibration - Adjustable release tension - Garmin Connect - Measurement location: Spindle - Communication: ANT+ and Bluetooth
- Strapless design is easy to engage without fully committing to the pedal - No special shoes required - Improves pedaling efficiency - molded from unbreakable nylon - Please make sure your pedals have visible mounting points or a Removable reflector for mounting prior to purchase - Includes mounting hardware. Note metal plate may not be required during installation.
Engineered to optimize the interface between the pedal and shoe for ultimate performance and power transfer. The kit includes: - 8 × 1mm traction pads - 8 × 2mm traction pads Compatible with: - Candy 7 & 11 - Model years 2016 – present
Crank Brothers' Tread Contact Sleeves shim the area between the pedal and your shoes' tread so there is no rocking or play when you're clipped in. They provide a solid platform to put down all your power! They work with either your Eggbeaters or Candy pedals, and each includes 1mm, 2mm, and 3mm shims.
Engineered to optimize the interface between the pedal and shoe for ultimate performance and power transfer. The kit includes: - 8 × 1mm traction pads - 8 × 2mm traction pads Compatible with: - Mallet E - Model years 2016 – present
VP's VX Trail Race Pedals are their top-of-the-line trail-sized SPD-cleat compatible race clipless mountain-bike pedals. They provide stability and add the utmost in longevity and durability in all conditions by employing light and durable aluminum bodies; forged, heat-treated and CNC-machined chromoly axles for strength and full roller bearings with a very high quality inner oil seal for long life. This trick set of pedals is designed to truly go the distance and see you through as many epic rides and full-on hammerfests as you can handle. Entry and exit is crisp and predictable and the release tension is adjustable. The VX Trail Races are also fully user-serviceable.
VP's Split Cleats boast super-smooth and easy entry/exit into your clipless pedals, excellent durability and maximum power transfer. They're made of a tough and light composite material, are compatible with VP and Look Keo pedals (pedals sold separately) and even have areas that grip for walking traction. That's all great, but what really sets the Split Cleats apart is how easily and accurately they can be replaced when they wear out. The cleats split in half so that you simply remove each half and use the half still on the shoe to ensure perfect cleat placement every time! With these cleats you'll never have to fuss around trying to get your new cleats in the right place again and it only takes a minute or two to replace cleats, too. Genius! The Split Cleats are available in 2 models, one with 7 degrees of lateral float for your feet and one that's fixed (no float).
Go from one-sided to dual-sided power measurement with Garmin's Vector 2S Upgrade Pedal. With your standard 2S system (sold separately) you only have power data from your left leg, which leaves the possibility of unknown discrepancies between your left and right sides. Injuries, natural imbalances, and other factors that leave one side of your body less powerful than the other are common. By measuring power from both legs, you get a much more accurate picture of what you're doing and how to improve on any asymmetry you might have.
Upgrade your Vector S pedal-based power meter to the dual-sensing Vector 2S system. Garmin's Vector S to Vector 2S Upgrade Kit can accommodate both standard (12-15 mm) and large (15-18 mm) crank arms. Upgrading allows you to take that next step in performance by measuring the power from both legs, which can reveal strength deficiencies between your left and right side.
Garmin's Vector 2 Replacement Pedal Pod replaces your old worn-out one for accurate power measurement and countless miles of more riding. • Standard: fits crank arms 15-18mm thick and up to 44mm wide • Large: fits crank arms 12-15mm thick and up to 44mm wide • ANT+ transmitter • User-replaceable battery (2032 coin cell) • 175 hours of active cycling operation • Compatible with Vector 2 and Vector S2 • Replacing a pedal pod does not impact Vector power or cadence accuracy • Single pod only
Our game-changing hybrid pedal is now available in a trail-ready version designed for more aggressive riding styles. Details - Hybrid pedal half flat / half clip-in - 8 adjustable traction pins and textured finish for grip - Wide 57mm q-factor for stability at speed - Diamond plate pads for traction - 2-sided entry / superior mud shedding - Premium bearings & double seal system Specs - Adjustable pins: 8 per side - Body material: A380 aluminum - Cleats: Premium brass cleats with shims included - Inner bearing type: Igus LL-glide bearing - Max rider weight: No restriction - Outer bearing type: Enduro cartridge bearing - Q-factor: 57mm - Release angle: 15° / 20° - Spindle material: Forged scm 435 chromoly steel - Spring material: 300 series stainless steel - Warranty: 5 years - Weight: 403g per pair - Wing material: Cast stainless steel
- Weight: 210g - Body: Carbon Injection-Molded - Spindle: Cromoly - Bearings: 3 Cartridge - Springs: SWP - Q-Factor: ±53 (mm) - Cleat: XPEDO THRUST 7 (6º Float or Fixed)
- Weight: 340g - Body: Magnesium - Spindle: CroMo - Bearings: 1 Cartridge - Bushings: 1 DU - Pins: 40 Volcano pins per pedal - Size: 100x98x18 (mm) - Colors: Gold, Black, Red, White
Page 1 of 3 Next page