Bike Power Meters
These aren't ordinary pedals. The P1 pedal is a simple, intelligent and uncompromising design that provides the same proven PowerTap accuracy and reliability. The simple one-piece design easily mounts to any crank and does not require calibration nor installation angle setting, providing a true “plug-and-play” experience. The P1 also features dual band ANT+ and Bluetooth SMART for compatibility with a multitude of head units and smart devices. Plus, the independent measurement opens the possibility for a new set of pedaling metrics previously unavailable to help give you the ultimate competitive edge.
The crankset is the heart of your bicycle and where you’ll find the SRAM RED Quarq power meter. The sole job of the crankset is to convert the effort from both legs to forward motion. It is the perfect place to measure power. This power meter works for every discipline: Road, triathlon, time trial, and cyclo-cross. The chainrings are replaceable should your bike, discipline, or ability change. - A direct force power meter that measures total power output from both legs with +/-1.5% accuracy - Works for every discipline: Road, triathlon, time trial, and cyclo-cross - No compromises on materials, shifting, wheels, or pedal choice - Proven by pro teams and athletes throughout the world – Cobbled Classics, Giro d’Italia, Tour de France, Vuelta a España, World Championships - Number 1 at the Ironman World Championship for the last three years - Uses a hidden bolt to mount the chainrings – compatible SRAM chainrings ensure the derailment pin lines up behind the crank arm - 10K – programmed with over 10,000 data points to eliminate temperature effects on power measurement - AxCad – A multi-axis accelerometer switches the power meter on and measures cadence, simplifying installation and operation - Breakthrough Materials – Exogram hollow carbon fiber crank arms – the lightest, strongest crank arms SRAM makes – minimize weight and maximize speed [ELSA RS, ELSA R and SRAM RED] - Easy to use (and reuse) – LED indicator and visible ANT+ ID - The replaceable CR2032 battery never leaves you without power - Manual and automatic zeroing make it truly set and forget - Built to Last – IPX7 waterproof rating, 2-year warranty, free firmware updates, and acclaimed international support - Moves with you from bike to bike - With Quarq's free Qalvin app – available for Windows, Mac, iOS and Android – you can set the zero offset, check battery voltage, run diagnostics, and perform firmware updates for free Arm Material: Carbon arms, Machined alloy spider Weight: 778 grams (GXP 172.5mm 53x39 BB not included) * Chainrings and BB sold separately
$1,079.00 - $1,079.99
When Quarq set out to build their next-generation power meter, they wanted to build the best-performing power meter for every facet of cycling and triathlon, and for riders at every level. Like its Quarq brethren, the new DZero measures power in the heart of the bicycle—the crankset spider, scientifically proven to be the place for the most accurate measurement. With a new measurement circuit, revised strain gauge design, improved accuracy throughout the pedal stroke and software advances built into the Qalvin App, the DZero represents the state of the art in power meter technology As Quarq’s next generation of power meters, the DZero combines 10 years of technology advances with new features such as dual Bluetooth low energy and ANT+ wireless data transfer, the new Qalvin BLE app and, for the carbon version, compatibility with BB386EVO bottom brackets. - 10K temperature compensation: Eliminates variables caused by heat and cold to provide an unwavering record of your performance through all conditions - Built to last: Features an IPX7 waterproof rating - Material: CNC Machined Aluminum Spider, Exogram Carbon Crank Arms - Accuracy: 1.5% - Bolt Circle Diameter: 130 BCD, 110 BCD - Q-Factor: 145mm - Wireless Technology: ANT+, Bluetooth low energy technology - Battery: CR2032, 200 hours of riding time - Weight: 578/559 grams (130/110 BCD) - Head Unit Compability: ANT+ and Bluetooth low energy technology compatible head units (available separately) - Compatibility: Traditional 5 bolt chainrings from most manufacturers. Hidden (HB) and Non-hidden Bolt (NHB) patterns. 10-speed, 11-speed, 1X and 2X. *Not compatible with Campagnolo chainrings
The CycleOps PowerTap G3 Aluminum Wheelset is an invaluable tool for training and racing! You'll be able to monitor and maximize every ride with these fast-rolling multi-purpose hoops. The PowerTap G3 rear hub and CycleOps front hub boast aluminum construction and wide flanges and are hand laced to lightweight aero-shaped rims for excellent stiffness, speed and handling. The G3 measures wattage for the ultimate objective training so you can tailor workouts and track progress. And, its convenient Ant+ wireless transmission sends your critical training information to any Ant+-compatible head unit (sold separately). PowerTap readings are accurate to within +/-1.5%, so you can truly measure short, intense intervals as well as longer efforts with pinpoint precision.
The Stages Power meter is built on to a non-drive FC-5800 crank arm specifically to pair with Shimano's 105 5800 crank. This Stages Power meter is slimmer, and up to 28% lower profile than their original meter. It's sleeker by way of a 17% reduction in frontal area, and Stages also made it stronger. The housing design increases the strength of the battery door and housing connection by 200%t over the previous design. This Shimano 5800 Stages Power meter is compatible with all Shimano Hollowtech II road drivetrains. - Accuracy: ± 2% - Weight: Only adds 20 grams to base crank arm - Battery Life: 200+ hours (coin cell: CR2032) - Power range (Watts): 0 to 2500 - Cadence range (rpm): 20-220 - Water resistance rating: IPX7 - Frame Compatibility: Most frames, see fit guide in our Support section - Crank Compatibility: All Shimano Hollowtech II road cranks - Device Compatibility: ANT+, Bluetooth Smart Ready - Software Compatibiity: Training Peaks, Strava, Garmin Training Center and others
Go from one-sided to dual-sided power measurement with Garmin's Vector 2S Upgrade Pedal. With your standard 2S system (sold separately) you only have power data from your left leg, which leaves the possibility of unknown discrepancies between your left and right sides. Injuries, natural imbalances, and other factors that leave one side of your body less powerful than the other are common. By measuring power from both legs, you get a much more accurate picture of what you're doing and how to improve on any asymmetry you might have.
Upgrade your Vector S pedal-based power meter to the dual-sensing Vector 2S system. Garmin's Vector S to Vector 2S Upgrade Kit can accommodate both standard (12-15 mm) and large (15-18 mm) crank arms. Upgrading allows you to take that next step in performance by measuring the power from both legs, which can reveal strength deficiencies between your left and right side.
Garmin's Vector 2 Replacement Pedal Pod replaces your old worn-out one for accurate power measurement and countless miles of more riding. • Standard: fits crank arms 15-18mm thick and up to 44mm wide • Large: fits crank arms 12-15mm thick and up to 44mm wide • ANT+ transmitter • User-replaceable battery (2032 coin cell) • 175 hours of active cycling operation • Compatible with Vector 2 and Vector S2 • Replacing a pedal pod does not impact Vector power or cadence accuracy • Single pod only
$1,349.99 - $1,549.99
Shimano's R9100 series crankset achieves the ultimate in optimal power transfer. It does this through its broader Hollowtech II arm and a more reinforced outer chainring on its unique asymmetrical four-arm spider construction. The R9100 cranks set the highest standards for stiffness and lightness. With the first integrated power meter, you can expect extremely accurate data. The FC-R9100-P is Shimano’s first power meter, as well as Shimano’s first crank-integrated power meter on the market. It retains its unique asymmetrical four-arm spider construction, but with a ‘brain’ mounted on the inside. On its crank arm are the strain gauges. Working perfectly in sync with each other, you can use the extremely precise power data to improve your performance. - Accurate real time data - Compatible with 3rd party displays - Bluetooth / ANT technology - Hollowtech II construction - Hollowglide chain - 11-speed compatible - Waterproof in all conditions - ±2% accuracy of strain gage measured power - Integrated rechargeable battery - Simple zero reset with switch on transmitter - Average weight (170mm, w/o BB): 691 grams (53-39T)/679 grams (50-34T)
Built to be just as robust and just as precise as its world-renowned sibling, the PowerTap Single-Sided Pedal has all the innovation of the P1 pedals – at a fraction of the price. Named for its single-sided nature, the PowerTap Single-Sided Pedal doubles the watts produced by the left pedal to calculate total power. The PowerTap Single-Sided Pedal also touts the same plug-and-play installation, easy-to-swap, cross-bike compatibility, along with dual-band ANT+ and Bluetooth as its bi-lateral counterpart. Ideal for the bike enthusiast, the weekend warrior or the power-training curious, there is no better way to get started with accurate pedal-based power than the PowerTap Single-Sided Pedal. - Weight: 390 grams per pair of pedals (without batteries) - Thread Type: 9/16" - Cleat Interface: 3 bolt - Cleat: Red, 6 degree floating - Spring Type: Adjustable Elastomer - Proven PowerTap accuracy - Release Tension: 6-20 Nm - Stack Height: 14mm - Center of Pedal: 53mm (measured from crank to pedal) - Lean Angle: 25.5 degrees (based on 175mm crank length, 75mm BB drop and 147mm Q-Factor crank) - Firmware Updates: Over the air - Connectivity: ANT+ and Bluetooth SMART - Battery: AAA Lithium (alkaline and/or rechargeable alkaline batteries not recommended for extended use) - Battery Life: 60 hours - No weight limit - PowerTap Single-Sided Pedals are not capable of providing advanced pedal metric data. In order to display advanced pedal metric data you must be using dual-sided P1 pedals.
Upgrade your Vector pedal-based power meter to the dual-sensing Vector 2 system. Garmin's Vector to Vector 2 Upgrade Kit can accommodate both standard (12-15 mm) and large (15-18 mm) crank arms. Upgrading allows you to take that next step in performance by measuring the power from both legs, which can reveal strength deficiencies between your left and right side.
Single-sensing Pedal-based Power Meter Ride stronger, smarter, connected with the Vector 3S pedal-based power meter. As you strive to beat your personal best on your next race or Gran Fondo, power is the most reliable way to gauge your performance on any given day, at any given time. Unlike other power meters, Vector 3S has a sensor housed in the left pedal, so it delivers reliable, accurate data on every training session. - Installs like any other pedal and quickly transfers between bikes - Reports cadence and total power (watts) - Easily upgrades to dual-sensing system - Fully integrates with Garmin cycling ecosystem for data analysis - Allows for easy updates via compatible Edge cycling computers, ANT+ connectivity or Bluetooth-enabled fitness devices and Garmin Connect Mobile app - Battery life: up to 120 hours - Cleat hardware included WARNING: The maximum weight limit of the cyclist using the Vector system is 231 lbs (105 kg). Cyclists over this weight limit risk personal injury and property damage. Specifications: - Battery type: LR44/SR44 (x2) - Battery life: up to 120 hours - Weight: 324 g - Max. rider weight: 105 kg - Accuracy: +/- 1.0% - Cleat type: Keo - Q-factor: 53 mm/ 55mm with supplied spacing washer - Stack height: 12.2 mm - Field calibration - Adjustable release tension - Garmin Connect - Measurement location: Spindle - Communication: ANT+ and Bluetooth
$479.99 $599.99 20% Savings
With Garmin's Vector 2S you'll find yourself breaking through mental barriers and eking out those last few watts. The Vector 2S offers precise power measurement of your left leg and uses that information to approximate your total and average power. All of this comes in a rugged, ultra-convenient, discreet package that's integrated with a Look Keo Pedal. Garmin encased the sensitive strain gauge inside the stainless steel pedal spindle for years of durability and accuracy to within +/- 2%. The pedal bodies are built of tough, light carbon, while the battery/ANT+ pod hangs protected beneath the left crank arm. The robust Vector 2S pod is easy to mount, and has a status light indicating when it's on and pairing occurs. Switching the pedals and pod between bikes is blissfully hassle-free and takes less time than getting kitted up. Garmin also offers you the ability to upgrade to the dual-sensing Vector system which provides additional data about the power produced by each leg.
The ANT+ Micro USB adapter allows on-the-go devices (OTG), such as your Android phone or tablet, to connect to an ANT+ USB stick. Android OTG compatible devices require ANT+ Radio Service and ANT+ USB Service to be installed from the Google Play store. These services allow the adapter to work correctly with an ANT+ USB stick.
Dual-sensing Pedal-based Power Meter Ride stronger, smarter, connected with the Vector 3 pedal-based power meter. As you strive to beat your personal best on your next race or Gran Fondo, power is the most reliable way to gauge your performance on any given day, at any given time. Unlike other power meters, Vector 3 has the sensors housed right in the pedals, so it delivers reliable, accurate data on every training session. - Installs like any other pedal and quickly transfers between bikes - Measures total power, left/right balance, cadence and cycling dynamics - Sleek design provides greater cornering clearance and improved stack height - Fully integrates with Garmin cycling ecosystem for data analysis - Allows for easy updates via compatible Edge cycling computers, ANT+ connectivity or Bluetooth-enabled fitness devices and Garmin Connect Mobile app - Battery life: up to 120 hours - Cleat hardware included WARNING: The maximum weight limit of the cyclist using the Vector system is 231 lbs (105 kg). Cyclists over this weight limit risk personal injury and property damage. Specifications: - Battery type: LR44/SR44 (x4) - Battery life: up to 120 hours - Weight: 316 g - Max. rider weight: 105 kg - Accuracy: +/- 1.0% - Cleat type: Keo - Q-factor: 53 mm/55 mm with supplied spacing washer - Stack height: 12.2 mm - Field calibration - Adjustable release tension - Garmin Connect - Measurement location: Spindle - Communication: ANT+ and Bluetooth
Pioneer's power meters are simply some of the best power-monitoring systems on the planet, and the SGX-CA500 computer is your chance to get the most out of your power meter and have a world-class data display. Pioneer has created the first, and only, power meter that measures power output and pedaling stroke efficiency for each individual leg, and the SGX-CA500 lets you analyze this data in real time. A few quick swipes give you access to your state-of-the-art ride data, and intuitive controls allow for scrolling, zooming, and screen customization to let you see what you want, when you want it. The 1.87-inch LCD screen makes it incredibly easy to see critical data, even if you are on the rivet up the final climb. As an added bonus, users of Shimano’s Di2 electronic road bicycle shifting system can now utilize the SGX-CA500 to track gearing and system status as they ride. - Delivers high functionality for practical situations, in a small, lightweight (75 g) package - Visualizes pedaling state and efficiency through graphical displays of force vectors (when used together with a pedaling monitor sensor) - Enables new modes of training focused on pedaling skill development - Displays over 100 data types, such as power, cadence, speed, and incline, all in real time - Easy, intuitive touch-panel operation, even when wearing full-finger gloves - Upload data to Cyclo-Sphere, our online data analysis service, via USB or Wi-Fi connection (Wi-Fi Internet connection required) - Weight: About 75 g - Dimensions: 58 mm (W) x 58 mm (H) x 19 mm (D) (without projection parts) - Connector: microUSB - Water-resistance: This device has a water-resistance rating of IPX-6/IPX-7 - Communications system (sensors): ANT+ - Communications method (network): Wi-Fi - Positioning system (latitude/longitude): GPS - Positioning system (altitude): Atmospheric pressure sensor - Display: 160x128 pixel, horizontal 1.87-inch outdoor type, Black and white touch panel (resistive touch display) - Built-in flash memory: 4 GB (user available capacity 3 GB) - Guaranteed operational temperature range: -10 to 50°C - Charging temperature: 0 to 45°C - Power supply voltage: DC 5V - Battery type: Lithium-ion battery - Battery operating time: Approximately 12 hours (the battery operating time may decrease depending on the operating conditions) - Charging time: Approximately 4 hours (Power off or normal charging) - Accessories: Bracket, USB cable, Strap, Quick Start Guide, Warranty card, Important Information for the User - Specifications and design are subject to change without notice.
The Stages Power meter is built on to a non-drive FC-6800 crank arm specifically to pair with Shimano's Ultegra 6800 crank. The new Stages Power meter is slimmer, and up to 28% lower profile than the original meter. It's sleeker by way of a 17% reduction in frontal area, and they've also made it stronger. The new housing design increases the strength of the battery door and housing connection by 200% over the previous design. This Shimano Ultegra 6800 Stages Power meter is compatible with all Shimano Hollowtech II road drivetrains. - Accuracy: ± 2% - Power meter housing: new low profile design, with new door interface - Weight: Only adds 20g to base crank arm - Battery Life: 200+ hours (coin cell: CR2032) - Power range (Watts): 0 to 2500 - Cadence range (rpm): 20-220 - Water resistance rating: IPX7 - Frame Compatibility: Most frames, see fit guide in the Support section - Device Compatibility: ANT+, Bluetooth Smart Ready Software - Compatibility: Training Peaks, Strava, Garmin Training Center and others
The CINCH Power Meter gives you the tool to train for the Enduro and XC glory you truly deserve. Protected in your BB Shell, the CINCH Power Meter not only gives you the advantage you need to gauge your training and push your boundaries, but it does it with the compatibility and performance you have come to expect from CINCH. Thanks to the adaptable spindle, you can pick your poison from NEXT SL G4 to Turbine R cranks, and with the Race Face CINCH App and both ANT+ and Bluetooth, you can hook it up to your favorite head unit and be on your way to the wattage cottage in no time. - Power Accuracy +/- 2% - Cadence & pedal efficiency data - Dual Bluetooth low energy technology / ANT+ for head unit compatibility - Battery life over 400h & USB rechargeable - Utilizing CINCH for 1x or 2x configurations - Cinch Power Meter App for iPhone or Android - Just 65g more than standard 134mm mountain spindle
Page 1 of 1